Bathtub reglazing using pour-on application in Bayonne will be an alternative to buying a new product. If large expenses and repairs of the bathroom are not included in your plans, then resurfacing by the pouring method will help to avoid this. This decision can be safely called the best for a modern person in conditions of constant haste and lack of time. Just imagine: just one day separates you from enjoying your favorite activities in a renewed bathroom.
We repair conventional and hydro-massage bathtubs, shower pans, and sinks in Bayonne, Hudson County, NJ. The method of restoration with liquid acrylic has been used by craftsmen for many years and is deservedly considered the most effective solution for any, even the most difficult case.
This material is suitable for cast iron and steel tubs coated with factory powder enamel. It will be no less effective on those products that have already been restored with epoxy enamel or tub insert.
A simple and perfect restoration technique allows you to transform a bathtub with damage of varying degrees of depth.
Liquid acrylic equally successfully copes with both color heterogeneity and loss of gloss, as well as with more serious defects such as material delamination, chips, or cracks.
The modern formula of compound makes it possible to reglaze bathtubs of various shapes and sizes, which makes it indispensable for the repair of non-standard products with complex relief.
The carefully calibrated consistency of the composition spreads over the surface, evenly distributed and leveled, filling the existing defects and damages.
The result of the repair is always an even, glossy, smooth finish. Such unnecessary effects as sagging, bald spots, streaks, air bubbles are a thing of the past, along with outdated materials.
Bathtub reglazing (also referred to as bathtub resurfacing or refinishing) is like giving an old bathtub a fresh coat of paint to make it look brand new. However, it goes much deeper than just a surface coating. It’s a durable, long-lasting material that restores the original shine and smooth finish to your tub.
Reglazing a tub is a more affordable and practical option than replacing it, which can be expensive and time consuming. It gives exceptional results with minimum hassle.
In addition, if you want to change the color of your bathtub, reglazing it is an excellent option.
The liquid acrylic material we use is ArmoGlaze, which is safe for you, your children, and the environment, with near zero VOC status. It solidifies and is ready to use in 24 hours. The material and process are odorless and non-toxic during application and after.
This technology has been used since 2011 with outstanding results.
The entire process of preparing and reglazing the bathtub is quick and convenient, normally taking around 3 hours (depending on the complexity of the work, more complex cases may take up to 4 hours).
The time required for complete drying and hardening of the material is about 24 hours. During the work and subsequent hardening time, there is no smell. Since there is no demolition or extensive renovation, there is much less mess and disruption to your daily routine. Our experienced, professional technicians take the utmost care to leave the work area clean and neat when they finish.
The professionally reglazed finish should last for 7 to 15 years with proper maintenance. It’s essential to follow the manufacturer’s required maintenance instructions in order to extend the lifespan of the finish. Our pour-on method lasts several times longer than spray-on techniques and resists peeling.
SERVICE | COST |
Caulking | $25 |
Removing sliding doors | $30 |
Distance surcharge | (Varies) |
Spray-On Application | Pour-On Application | |
Durability | 1-3 years | 7-15 years |
Speed of service | 2-3 days | Same day |
Process completion | 5 hours or more | 3-4 hours |
Odorless | no | yes |
Drying Time | 2 days | 24 hours |
COST | Starting at $259 | Starting at $259 |
Bathtub refinishing with acrylic is a godsend for those who value their time or simply cannot deal with repairs for a long time in a busy work schedule. This method does not require a dismantling of the bath or other complex work that restricts access to the bathroom and inconveniences the residents of the apartment.
The craftsman works with the surface of the tub, without changing its location, which not only saves time but also excludes the possibility of damaging the wall tiles. The interior of the bathroom remains intact, and the bathtub itself is transformed. Often, this is quite enough for the whole bathroom to be perceived completely differently.
Bathtub reglazing with compound takes an average of about 3-4 hours, after which you need to wait for the time of complete polymerization of the material. Depending on which variety has been chosen, this can take 24 hours.
Liquid acrylic meets all modern safety requirements. It does not have any smell nor require ventilation and is completely harmless to people, animals, and the environment. Despite such a mild formula, the material is characterized by strength, which is many times superior to other options. The surface, restored by the pouring method is resistant to impacts, cracks, does not react to sudden temperature changes, and is capable of repelling dirt. Acrylic is the most hygienic coating because it does not develop mold spores and microorganisms.
Our responsive, friendly service and time-tested superior product set us apart in the industry. But don’t just take our word for it—listen to what our clients have to say:
By investing once in the restoration of a bathtub using pour-on application method, you extend its service life by at least 7-10 years. All this time, it will maintain a pleasant appearance, tactile smoothness, and an elegant gloss. When you order a tub upgrade from our company, you get a flawless job and documented quality assurance.